12th International Workshop on Plasma Based Ion Implantation and Deposition

›8:15 (25min)

Opening
L. Pichon, P.K. Chu

› IFMI Amphitheatre

8:15 - 8:40 (25min)

Opening

IFMI Amphitheatre

L. Pichon, P.K. Chu

›8:40 (45min)

Plenary Talk
P.K. Chu, J.-P. Rivière

› IFMI Amphitheatre

8:40 - 9:25 (45min)

Plenary Talk

IFMI Amphitheatre

P.K. Chu, J.-P. Rivière

› Convergence of Plasma-Based Ion Implantation and Deposition Techniques (Plenary talk) - Andre Anders, Lawrence Berkeley National Laboratory, USA 08:40-09:25 (45min)

›9:25 (1h15)

Plasma and Ion Sources, Pulsed Power and PBII Systems
P.K. Chu, J.-P. Rivière

› IFMI Amphitheatre

9:25 - 10:40 (1h15)

Plasma and Ion Sources, Pulsed Power and PBII Systems

IFMI Amphitheatre

P.K. Chu, J.-P. Rivière

› Solid-State modulators for Plasma Based Ion Implantation (Invited talk) - Luis Redondo, Lisbon Engineering Superior Institute, Nuclear Physics Center from Lisbon University 09:25-10:00 (35min)

› Modulation Effects of Controllable Waveform configuration of Pulsed Bias on Microstructure and Properties of CrN Films by Magnetron Sputtering - Chunzhi Gong, State Key Lab. of Advanced Welding & Joining, Harbin Institute of Technology 10:00-10:20 (20min)

› Plasma immersion ion implantation inside a conducting tube using an ExB fields configuration - Mario Ueda, Associated Laboratory of Plasma, National Institute for Space Research, S. J. Campos, S. Paulo, Brazil 10:20-10:40 (20min)

›10:40 (20min)

Coffee break

› IFMI Hall

10:40 - 11:00 (20min)

Coffee break

IFMI Hall

›11:00 (1h40)

Biomedical applications
S. Mandl, C. Dublanche-Tixier

› IFMI Amphitheatre

11:00 - 12:40 (1h40)

Biomedical applications

IFMI Amphitheatre

S. Mandl, C. Dublanche-Tixier

› Surface modification of biomedical titanium using silver plasma immersion ion implantation (Invited talk) - Xuanyong Liu, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences 11:00-11:35 (35min)

› Bioactivity of titanium surfaces after oxygen and water plasma treatments - Gelson de Souza, Universidade Estadual de Ponta Grossa - Carlos Foerster, Universidade Estadual de Ponta Grossa 11:35-11:55 (20min)

› On Antimicrobial Surface Modifications of Titanium Substrates by Metal Plasma Immersion Ion Implantation and Deposition for Medical Applications - Frank Hempel, Leibniz-Institute for Plasma Science and Technology e.V. (INP) 11:55-12:15 (20min)

› The mechanical compatibility and corrosion resistance of the titanium oxide film for vascular stent modification - Yongxiang Leng, Southwest Jiaotong University - Nan Huang, Southwest Jiaotong University 12:15-12:35 (20min)

›12:40 (1h35)

Lunch

12:40 - 14:15 (1h35)

Lunch

›14:15 (2h15)

Plasma-Based Ion Implantation, Ion Beam Implantation and Plasma Surface Processing
S. Mukherjee, P.-Y. Tessier

› IFMI Amphitheatre

14:15 - 16:30 (2h15)

Plasma-Based Ion Implantation, Ion Beam Implantation and Plasma Surface Processing

IFMI Amphitheatre

S. Mukherjee, P.-Y. Tessier

› New Developments of Active-Screen Plasma Surface Engineering (Invited talk) - Hanshan Dong, The University of Birmingham 14:15-14:50 (35min)

› Electrical property modification of graphene by low energy ion implantation - Noriaki Matsunami, Nagoya University 14:50-15:10 (20min)

› Influence of Reduced Current Density on PIII Nitriding of Austenitic Stainless Steel and CoCr Alloys - Stephan Mändl, Leibniz-Institut für Oberflächenmodifizierung 15:10-15:30 (20min)

› Plasma immersion ion implantation against corrosion of PbSn organ pipes - Bernadeta Pelic, Helmholtz Zentrum Dresden-Rossendorf 15:30-15:50 (20min)

› Plasma Immersion Ion Implantation tecnique in NiTi SMA produced by powder metallurgy - Eliene Camargo, Divisão de Materiais, Instituto Tecnológico de Aeronáutica 15:50-16:10 (20min)

›16:30 (30min)

Coffee break

› IFMI Hall

16:30 - 17:00 (30min)

Coffee break

IFMI Hall

›17:00 (2h)

Posters session A

› IFMI - Rooms A & B

17:00 - 19:00 (2h)

Posters session A

IFMI - Rooms A & B

› 3D Numerical simulation of ceramic droplet impact on different roughness surfaces in plasma spray process - Abdelbaki DJEBAILI, Djebaili 17:00-19:00 (2h)

› Comparison of electrochemical behaviour of TiN and TiCN deposited on XC48 steel substrates by magnetron sputtering. - madaoui noureddine, Division Milieux Ionisés, centre de développement des technologies avancées, Laboratoire d'Electrochimie-Corrosion, Métallurgie et Chimie Minérale. Faculté de chimie, Université Des Sciences et de la Technologie Houari Boumediene. 17:00-19:00 (2h)

› Comparison of surface patterning realized with and without ion bombardment on steels - Thierry Czerwiec, Institut Jean Lamour 17:00-19:00 (2h)

› COMPARISON OF THREE DIFFERENT NITRIDING METHODS ON AISI 316L STAINLESS STEEL REGARDING WEAR AND CORROSION PERFORMANCE - Sonia Brühl, Universidad Tecnológica Nacional - Laura Vaca, Universidad Tecnológica Nacional 17:00-19:00 (2h)

› Corrosion behavior of inconel 718 superalloy treated by plasma based ion implantation - Ana Claudia Hirschmann, Instituto tecnologico da aeronatica - H Reuther, eResearch Center Dresden-Rossendorf, Institute of Íon Beam Physics and Materials Research, Dreseden, Germany 17:00-19:00 (2h)

› Effect of glow discharge low temperature nitriding and cathodic hydrogenation on hardness and surface morphology depending on crystallographic orientation in SAF 2101 duplex steel - Carlos Foerster, Universidade Estadual de Ponta Grossa 17:00-19:00 (2h)

› EFFECT OF LOW RF BIAS POTENTIAL ON AlN FILMS OBTAINED BY PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION - Christelle DUBLANCHE-TIXIER, SPCTS CNRS UMR 7315 University of Limoges 17:00-19:00 (2h)

› Effect of substrate bias on microstructure evolution and infrared reflectivity of TiAl alloy thin films - Zhang Min, School of Physics & Electronic Technology, Liaoning Normal University, Lab of Fuel Cell System & Engineering, Dalian Institute of Chemical Physics, Chinese Academy of Science 17:00-19:00 (2h)

› Effects of pulsed bias on TiCN coatings by hybrid deposition of arc ion plating and magnetron sputtering - Meidong Huang, College of Physics and Electronic Information Science, Tianjin Normal University, Tianjin 300387, China 17:00-19:00 (2h)

› Elaboration and characterization of Gum metal thin films obtained by dc magnetron sputtering. - Sofiane ACHACHE, LASMIS - Salim Lamri, LASMIS - Alain Billard, LERMPS - Manuel FRANCOIS, LASMIS - fréderic SANCHETTE, LASMIS 17:00-19:00 (2h)

› Electrochemical and nanomechanical characterization of ZrN coated NiTi after plasma nitriding - Rodrigo Basso, Universidade Federal da Integração Latino-Americana 17:00-19:00 (2h)

› Growth-induced defect generation and intrinsic stress in Ta sputtered films : a comparison between alpha-Ta and beta-Ta phases - Jonathan Colin, Institut Pprime 17:00-19:00 (2h)

› Improvement of Oxidation-resistance of CrN films by Plasma Ion Implantation Based on High-power Pulsed Magnetron Sputtering - Yinghe Ma, State Key Lab. of Advanced Welding & Joining 17:00-19:00 (2h)

› Influence of Plasma Based Ion Implantation on the martensitic transformations temperatures of NiTi SMA - Maria Silva, Insituto Tecnológico de Aeronáutica 17:00-19:00 (2h)

› Ion nitriding of supermartensitic stainless steel HP13Cr by the glow discharge and cathodic cage techniques - Gelson de Souza, Universidade Estadual de Ponta Grossa - Carlos Foerster, Universidade Estadual de Ponta Grossa 17:00-19:00 (2h)

› Mechanical study of nano-structured thin films under controlled biaxial deformation - Raphaëlle GUILLOU, Institut Pprime 17:00-19:00 (2h)

› MFM imaging of expanded austenite formed in stainless steel and CoCr alloys - Mehmet Fidan, Iztech 17:00-19:00 (2h)

› MICROSTRUCTURE AND CORROSION BEHAVIOUR OF ION NITRIDED AISI 316L COATED WITH TITANIUM NITRIDE - Laura Vaca, Universidad Tecnológica Nacional - Sonia Brühl, Universidad Tecnológica Nacional 17:00-19:00 (2h)

› Modification of surface morphology of austenitic-like FCC alloys induced by plasma assisted nitriding - Sébastien CHOLLET, Institut Pprime 17:00-19:00 (2h)

› Nanoindentation measurements in plan view and cross section in a nitrided maraging steel: relation between hardness and nitrogen concentration - Christophe TROMAS, Institut Pprime 17:00-19:00 (2h)

› Nitriding of maraging steel grade 300 by plasma immersion ion implantation - Jose García, Asociación de la Industria Navarra 17:00-19:00 (2h)

› Nitrogen plasma immersion ion implantation in round wire NiTi SMA - Eliene Camargo, Divisão de Materiais 17:00-19:00 (2h)

› Plasma immersion ion implantation of oxygen and nitrogen as a tool for studying the environmental embrittlement in TiAl alloys at elevated temperatures - Rossen Yankov, Helmholtz-Zentrum Dresden-Rossendorf 17:00-19:00 (2h)

› Plasma-based nitriding and oxidizing of CoCrMo: investigation of structural and corrosion characteristics for biomedical applications - Fotini Noli, Aristotle University 17:00-19:00 (2h)

› Roughness and creep studies of Ti-6Al-4V alloy treated by Nitrogen Plasma Based Ion Implantation - Susana Zepka, Instituto Tecnológico de Aeronáutica - Maria Silva, Instituto Tecnológico de Aeronáutica - Danieli Reis, Universidade Federal de São Paulo - Mário Ueda, National Institute for Space Research - Carlos Moura Neto, Instituto Tecnológico de Aeronáutica - Luc PICHON, Institut Pprime 17:00-19:00 (2h)

› Stabilization of α-Ta by WTi ultra-thin underlayer - Arnaud Le Priol, Institut Pprime, Sofradir - Argenteuil 17:00-19:00 (2h)

› Structural and mechanical properties of TiON nanocomposite films deposited on silicon by pulsed bias arc ion plating - Zhang Min, Lab of Fuel Cell System & Engineering, Dalian Institute of Chemical Physics, Chinese Academy of Science, School of Physics & Electronic Technology, Liaoning Normal University 17:00-19:00 (2h)

› Surface modification and corrosion properties of implanted and DLC coated stainless steel by plasma based ion implantation - Ruriko Hatada, Technische Universitaet Darmstadt 17:00-19:00 (2h)

› Synthesis of carbon/metal nanocomposites by PVD/PECVD - Pierre-Yves Tessier, Institut des Matériaux Jean Rouxel 17:00-19:00 (2h)

› The effect of element content on structure and mechanical properties - Xinxin Ma, State Key Lab of Advanced Welding and Joining, Harbin Institute of Technology 17:00-19:00 (2h)

› THE PREDICTION OF COATING MICROSTRUCTURE IN PLASMA SPRAY PROCESS - Abdelbaki DJEBAILI, Djebaili - Benoumsaad Kamel, Kamel 17:00-19:00 (2h)

› The Research of Cutting Tools Superhard Films having Strong Films and Substrate Binding Energy - pengzhi zhu, School of Mechanical Engineering and Automation - Beihang University 17:00-19:00 (2h)

› TiN ions implantation on SS316L targets by a 4kJ plasma focus facility - Morteza Habibi, Amirkabir University of Technology 17:00-19:00 (2h)

› Tungsten Coated on Copper Substrate Through the Double-Glow Discharge - Chen Qiang, Beijing Institute of Graphic Communication 17:00-19:00 (2h)

› Wear and corrosion protective coatings produced by plasma electrolytic oxidation of aluminum alloys - Nilson Cruz, Univ Est Paulista 17:00-19:00 (2h)

›19:00 (2h)

"Wines and Cheeses" Party

› IFMI Hall

19:00 - 21:00 (2h)

"Wines and Cheeses" Party

IFMI Hall