Scheduled programme
| Time |
Event |
|
|
17:00 - 19:00
|
Registration in Plaza Hotel - Registration board will be opened in the Plaza Hotel from 5:00 PM |
|
|
19:00 - 21:00
|
Welcome reception - Welcome reception will take place at the Plazza Hotel
Téléport 1 – Avenue du Futuroscope - 86960 FUTUROSCOPE CHASSENEUIL
at 200 m of the Workshop place (IFMI building)
Registration board will be opened from 5:00 PM in the Plaza Hotel |
|
| Time |
Event |
|
|
08:15 - 08:40
|
Opening (IFMI Amphitheatre) - L. Pichon, P.K. Chu |
|
|
08:40 - 09:25
|
Plenary Talk (IFMI Amphitheatre) - P.K. Chu, J.-P. Rivière |
|
| 08:40 - 09:25 |
› Convergence of Plasma-Based Ion Implantation and Deposition Techniques (Plenary talk) - Andre Anders, Lawrence Berkeley National Laboratory, USA |
|
|
09:25 - 10:40
|
Plasma and Ion Sources, Pulsed Power and PBII Systems (IFMI Amphitheatre) - P.K. Chu, J.-P. Rivière |
|
| 09:25 - 10:00 |
› Solid-State modulators for Plasma Based Ion Implantation (Invited talk) - Luis Redondo, Lisbon Engineering Superior Institute, Nuclear Physics Center from Lisbon University |
|
| 10:00 - 10:20 |
› Modulation Effects of Controllable Waveform configuration of Pulsed Bias on Microstructure and Properties of CrN Films by Magnetron Sputtering - Chunzhi Gong, State Key Lab. of Advanced Welding & Joining, Harbin Institute of Technology |
|
| 10:20 - 10:40 |
› Plasma immersion ion implantation inside a conducting tube using an ExB fields configuration - Mario Ueda, Associated Laboratory of Plasma, National Institute for Space Research, S. J. Campos, S. Paulo, Brazil |
|
|
10:40 - 11:00
|
Coffee break (IFMI Hall) |
|
|
11:00 - 12:40
|
Biomedical applications (IFMI Amphitheatre) - S. Mandl, C. Dublanche-Tixier |
|
| 11:00 - 11:35 |
› Surface modification of biomedical titanium using silver plasma immersion ion implantation (Invited talk) - Xuanyong Liu, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences |
|
| 11:35 - 11:55 |
› Bioactivity of titanium surfaces after oxygen and water plasma treatments - Gelson de Souza, Universidade Estadual de Ponta Grossa - Carlos Foerster, Universidade Estadual de Ponta Grossa |
|
| 11:55 - 12:15 |
› On Antimicrobial Surface Modifications of Titanium Substrates by Metal Plasma Immersion Ion Implantation and Deposition for Medical Applications - Frank Hempel, Leibniz-Institute for Plasma Science and Technology e.V. (INP) |
|
| 12:15 - 12:35 |
› The mechanical compatibility and corrosion resistance of the titanium oxide film for vascular stent modification - Yongxiang Leng, Southwest Jiaotong University - Nan Huang, Southwest Jiaotong University |
|
|
12:40 - 14:15
|
Lunch |
|
|
14:15 - 16:30
|
Plasma-Based Ion Implantation, Ion Beam Implantation and Plasma Surface Processing (IFMI Amphitheatre) - S. Mukherjee, P.-Y. Tessier |
|
| 14:15 - 14:50 |
› New Developments of Active-Screen Plasma Surface Engineering (Invited talk) - Hanshan Dong, The University of Birmingham |
|
| 14:50 - 15:10 |
› Electrical property modification of graphene by low energy ion implantation - Noriaki Matsunami, Nagoya University |
|
| 15:10 - 15:30 |
› Influence of Reduced Current Density on PIII Nitriding of Austenitic Stainless Steel and CoCr Alloys - Stephan Mändl, Leibniz-Institut für Oberflächenmodifizierung |
|
| 15:30 - 15:50 |
› Plasma immersion ion implantation against corrosion of PbSn organ pipes - Bernadeta Pelic, Helmholtz Zentrum Dresden-Rossendorf |
|
| 15:50 - 16:10 |
› Plasma Immersion Ion Implantation tecnique in NiTi SMA produced by powder metallurgy - Eliene Camargo, Divisão de Materiais, Instituto Tecnológico de Aeronáutica |
|
|
16:30 - 17:00
|
Coffee break (IFMI Hall) |
|
|
17:00 - 19:00
|
Posters session A (IFMI - Rooms A & B ) |
|
| 17:00 - 19:00 |
› 3D Numerical simulation of ceramic droplet impact on different roughness surfaces in plasma spray process - Abdelbaki DJEBAILI, Djebaili |
|
| 17:00 - 19:00 |
› Comparison of electrochemical behaviour of TiN and TiCN deposited on XC48 steel substrates by magnetron sputtering. - madaoui noureddine, Division Milieux Ionisés, centre de développement des technologies avancées, Laboratoire d'Electrochimie-Corrosion, Métallurgie et Chimie Minérale. Faculté de chimie, Université Des Sciences et de la Technologie Houari Boumediene. |
|
| 17:00 - 19:00 |
› Comparison of surface patterning realized with and without ion bombardment on steels - Thierry Czerwiec, Institut Jean Lamour |
|
| 17:00 - 19:00 |
› COMPARISON OF THREE DIFFERENT NITRIDING METHODS ON AISI 316L STAINLESS STEEL REGARDING WEAR AND CORROSION PERFORMANCE - Sonia Brühl, Universidad Tecnológica Nacional - Laura Vaca, Universidad Tecnológica Nacional |
|
| 17:00 - 19:00 |
› Corrosion behavior of inconel 718 superalloy treated by plasma based ion implantation - Ana Claudia Hirschmann, Instituto tecnologico da aeronatica - H Reuther, eResearch Center Dresden-Rossendorf, Institute of Íon Beam Physics and Materials Research, Dreseden, Germany |
|
| 17:00 - 19:00 |
› Effect of glow discharge low temperature nitriding and cathodic hydrogenation on hardness and surface morphology depending on crystallographic orientation in SAF 2101 duplex steel - Carlos Foerster, Universidade Estadual de Ponta Grossa |
|
| 17:00 - 19:00 |
› EFFECT OF LOW RF BIAS POTENTIAL ON AlN FILMS OBTAINED BY PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION - Christelle DUBLANCHE-TIXIER, SPCTS CNRS UMR 7315 University of Limoges |
|
| 17:00 - 19:00 |
› Effect of substrate bias on microstructure evolution and infrared reflectivity of TiAl alloy thin films - Zhang Min, School of Physics & Electronic Technology, Liaoning Normal University, Lab of Fuel Cell System & Engineering, Dalian Institute of Chemical Physics, Chinese Academy of Science |
|
| 17:00 - 19:00 |
› Effects of pulsed bias on TiCN coatings by hybrid deposition of arc ion plating and magnetron sputtering - Meidong Huang, College of Physics and Electronic Information Science, Tianjin Normal University, Tianjin 300387, China |
|
| 17:00 - 19:00 |
› Elaboration and characterization of Gum metal thin films obtained by dc magnetron sputtering. - Sofiane ACHACHE, LASMIS - Salim Lamri, LASMIS - Alain Billard, LERMPS - Manuel FRANCOIS, LASMIS - fréderic SANCHETTE, LASMIS |
|
| 17:00 - 19:00 |
› Electrochemical and nanomechanical characterization of ZrN coated NiTi after plasma nitriding - Rodrigo Basso, Universidade Federal da Integração Latino-Americana |
|
| 17:00 - 19:00 |
› Growth-induced defect generation and intrinsic stress in Ta sputtered films : a comparison between alpha-Ta and beta-Ta phases - Jonathan Colin, Institut Pprime |
|
| 17:00 - 19:00 |
› Improvement of Oxidation-resistance of CrN films by Plasma Ion Implantation Based on High-power Pulsed Magnetron Sputtering - Yinghe Ma, State Key Lab. of Advanced Welding & Joining |
|
| 17:00 - 19:00 |
› Influence of Plasma Based Ion Implantation on the martensitic transformations temperatures of NiTi SMA - Maria Silva, Insituto Tecnológico de Aeronáutica |
|
| 17:00 - 19:00 |
› Ion nitriding of supermartensitic stainless steel HP13Cr by the glow discharge and cathodic cage techniques - Gelson de Souza, Universidade Estadual de Ponta Grossa - Carlos Foerster, Universidade Estadual de Ponta Grossa |
|
| 17:00 - 19:00 |
› Mechanical study of nano-structured thin films under controlled biaxial deformation - Raphaëlle GUILLOU, Institut Pprime |
|
| 17:00 - 19:00 |
› MFM imaging of expanded austenite formed in stainless steel and CoCr alloys - Mehmet Fidan, Iztech |
|
| 17:00 - 19:00 |
› MICROSTRUCTURE AND CORROSION BEHAVIOUR OF ION NITRIDED AISI 316L COATED WITH TITANIUM NITRIDE - Laura Vaca, Universidad Tecnológica Nacional - Sonia Brühl, Universidad Tecnológica Nacional |
|
| 17:00 - 19:00 |
› Modification of surface morphology of austenitic-like FCC alloys induced by plasma assisted nitriding - Sébastien CHOLLET, Institut Pprime |
|
| 17:00 - 19:00 |
› Nanoindentation measurements in plan view and cross section in a nitrided maraging steel: relation between hardness and nitrogen concentration - Christophe TROMAS, Institut Pprime |
|
| 17:00 - 19:00 |
› Nitriding of maraging steel grade 300 by plasma immersion ion implantation - Jose García, Asociación de la Industria Navarra |
|
| 17:00 - 19:00 |
› Nitrogen plasma immersion ion implantation in round wire NiTi SMA - Eliene Camargo, Divisão de Materiais |
|
| 17:00 - 19:00 |
› Plasma immersion ion implantation of oxygen and nitrogen as a tool for studying the environmental embrittlement in TiAl alloys at elevated temperatures - Rossen Yankov, Helmholtz-Zentrum Dresden-Rossendorf |
|
| 17:00 - 19:00 |
› Plasma-based nitriding and oxidizing of CoCrMo: investigation of structural and corrosion characteristics for biomedical applications - Fotini Noli, Aristotle University |
|
| 17:00 - 19:00 |
› Roughness and creep studies of Ti-6Al-4V alloy treated by Nitrogen Plasma Based Ion Implantation - Susana Zepka, Instituto Tecnológico de Aeronáutica - Maria Silva, Instituto Tecnológico de Aeronáutica - Danieli Reis, Universidade Federal de São Paulo - Mário Ueda, National Institute for Space Research - Carlos Moura Neto, Instituto Tecnológico de Aeronáutica - Luc PICHON, Institut Pprime |
|
| 17:00 - 19:00 |
› Stabilization of α-Ta by WTi ultra-thin underlayer - Arnaud Le Priol, Institut Pprime, Sofradir - Argenteuil |
|
| 17:00 - 19:00 |
› Structural and mechanical properties of TiON nanocomposite films deposited on silicon by pulsed bias arc ion plating - Zhang Min, Lab of Fuel Cell System & Engineering, Dalian Institute of Chemical Physics, Chinese Academy of Science, School of Physics & Electronic Technology, Liaoning Normal University |
|
| 17:00 - 19:00 |
› Surface modification and corrosion properties of implanted and DLC coated stainless steel by plasma based ion implantation - Ruriko Hatada, Technische Universitaet Darmstadt |
|
| 17:00 - 19:00 |
› Synthesis of carbon/metal nanocomposites by PVD/PECVD - Pierre-Yves Tessier, Institut des Matériaux Jean Rouxel |
|
| 17:00 - 19:00 |
› The effect of element content on structure and mechanical properties - Xinxin Ma, State Key Lab of Advanced Welding and Joining, Harbin Institute of Technology |
|
| 17:00 - 19:00 |
› THE PREDICTION OF COATING MICROSTRUCTURE IN PLASMA SPRAY PROCESS - Abdelbaki DJEBAILI, Djebaili - Benoumsaad Kamel, Kamel |
|
| 17:00 - 19:00 |
› The Research of Cutting Tools Superhard Films having Strong Films and Substrate Binding Energy - pengzhi zhu, School of Mechanical Engineering and Automation - Beihang University |
|
| 17:00 - 19:00 |
› TiN ions implantation on SS316L targets by a 4kJ plasma focus facility - Morteza Habibi, Amirkabir University of Technology |
|
| 17:00 - 19:00 |
› Tungsten Coated on Copper Substrate Through the Double-Glow Discharge - Chen Qiang, Beijing Institute of Graphic Communication |
|
| 17:00 - 19:00 |
› Wear and corrosion protective coatings produced by plasma electrolytic oxidation of aluminum alloys - Nilson Cruz, Univ Est Paulista |
|
|
19:00 - 21:00
|
"Wines and Cheeses" Party (IFMI Hall) |
|
| Time |
Event |
|
|
08:40 - 10:15
|
Corrosion and Wear Treatments (IFMI Amphitheatre) - X.B. Tian, T. Czerwiec |
|
| 08:40 - 09:15 |
› Depth dependent phase transformation in steels treated with nitrogen plasma (Invited talk) - SUBROTO MUKHERJEE, Institute for Plasma Research, India |
|
| 09:15 - 09:35 |
› Wear behaviors and corrosion resistance of aluminum alloys treated by nitrogen plasma immersion ion implantation process - Hongxi Liu, Kunming University of Science and Technology |
|
| 09:35 - 09:55 |
› Reduction of Corrosion Current of CoCr Alloys by Post-PIII Oxidation - Cristina Díaz, Asociacion de la Industria Navarra |
|
| 09:55 - 10:15 |
› Cavitation erosion resistance of Carbon Steels Implanted with Nitrogen and Chromium ions - Fengbin Liu, North China University of Technology |
|
|
10:15 - 10:45
|
Coffee break (IFMI Hall) |
|
|
10:45 - 12:40
|
Plasma-Based Ion Implantation, Ion Beam Implantation and Plasma Surface Processing (IFMI Amphitheatre) - H. Dong, C. Templier |
|
| 10:45 - 11:20 |
› Analysis of In Situ XRD Measurements for Nitriding of fcc Metals (Invited talk) - Darina Manova, Leibniz-Institut für Oberflächenmodifizierung |
|
| 11:20 - 11:40 |
› Hardness and elastic modulus gradients in plasma nitrided 316l polycrystalline stainless steel investigated by nanoindentation tomography - Christophe TROMAS, Institut Pprime |
|
| 11:40 - 12:00 |
› Improved Hardness and Tribological Properties and Detailed Surface Analyses of Niobium Treated by High Temperature Plasma Based Ion Implantation - Mario Ueda, Associated Laboratory of Plasma, National Institute for Space Research, S. J. Campos, S. Paulo, Brazil |
|
| 12:00 - 12:20 |
› Characteristic features of expanded austenite layers formed on CoCrMo implant alloy by floating potential plasma nitriding - Orhan Öztürk, Izmir University |
|
| 12:20 - 12:40 |
› Surface modification of protective coatings on titanium aluminides by plasma immersion ion implantation of fluorine to suppress environmental embrittlement at high temperatures - Rossen Yankov, Helmholtz-Zentrum Dresden-Rossendorf |
|
|
12:40 - 14:15
|
Lunch |
|
|
14:15 - 16:30
|
Plasma-Based Ion Assisted Deposition and Pulsed Power Deposition (IFMI Amphitheatre) - C.A. Figueroa, L. Redondo |
|
| 14:15 - 14:50 |
› Reactive High-Power Impulse Magnetron Sputtering: plasma diagnostics and thin film synthesis (Invited talk) - Stephanos Konstantinidis, University of Mons |
|
| 14:50 - 15:10 |
› Hydrogen Induced Buckling of Gold Films - Marot Laurent, Department of Physics University of Basel |
|
| 15:10 - 15:30 |
› Calculation of film thickness distribution onto disk substrates in multi-cathode magnetron sputtering system with plate targets - Anatoly Kuzmichev, National Technical University of Ukraine "Kiev Politechnical Institute" |
|
| 15:30 - 15:50 |
› Nanorippled dielectric thin films as templates for self-organized silver nanoparticles using a dual ion-beam sputtering system - Elliot Vandenhecke, Institut Pprime - Poitiers |
|
| 15:50 - 16:10 |
› IN SITU XRD STUDIES, USING SYNCHROTRON RADIATION, OF THIN FILM GROWING BY REACTIVE SPUTTER MAGNETRON TECHNIQUE. - Jorge Feugeas, Instituto de Fisica Rosario, CONICET-UNR - Aldo Craievich, Universidad de São Paulo, São Paulo, Brasil |
|
| 16:10 - 16:30 |
› Development of in-plane texture in Cu thin films by post deposition ion beam treatment - Huan Ma, Department of Materials, ETH Zurich |
|
|
17:00 - 23:00
|
Futuroscope Park discovery - Free access to the Futuroscope Park
Free dinner in the available restaurants in the park (not included)
Laser and Light show at 22:30
|
|
| Time |
Event |
|
|
08:40 - 10:15
|
Alternative & Hybrid Processes (IFMI Amphitheatre) - M. Ueda, M.-L. David |
|
| 08:40 - 09:15 |
› Surface modification of materials by cold atmospheric plasma (Invited talk) - Konstantin G. Kostov, Universidade Estadual Paulista |
|
| 09:15 - 09:35 |
› Numerous impacts of energetic fullerene clusters on silicon crystal surface: modification features - Vasily Lavrentiev, Nuclear Physics Institute AS CR |
|
| 09:35 - 09:55 |
› Duplex surface treatments combining surface mechanical attrition treatment (SMAT) and low temperature plasma nitriding - Mahdi CHEMKHI, University of Technology of Troyes |
|
| 09:55 - 10:15 |
› Kinetics of hydrogen interaction with a-Si:H based thin films and structures : In situ ellipsometry investigation - Aomar HADJADJ, Laboratoire d'Ingénierie et Sciences des Matériaux |
|
|
10:15 - 10:45
|
Coffee break (IFMI Hall) |
|
|
10:45 - 12:40
|
Industrial Applications, Scaling Issues (IFMI Amphitheatre) - A. Anders, M. Drouet |
|
| 10:45 - 11:20 |
› Plasma Immersion Ion Implantation for Semiconductor Industries: Specific Challenges and Example of Applications for Advanced Devices (Invited talk) - Yohann Spiegel, Ion Beam Services |
|
| 11:20 - 11:40 |
› HiPIMS deposition of oxide thin films for solid oxide fuel cells - Steffen Sønderby, Tribology Centre, Danish Technological Institute, Thin Film Division, Department of Physics, Chemistry, and Biology, Linköping University |
|
| 11:40 - 12:00 |
› Multidimensional depth profile analysis of Plasma Coatings by Plasma Profiling Techniques, GD OES and PP TOFMS - Patrick Chapon, Horiba Jobin Yvon |
|
|
12:40 - 14:15
|
Lunch |
|
|
14:15 - 16:30
|
Posters session B (IFMI - Rooms A & B ) |
|
| 14:15 - 16:30 |
› Atomic-layer thinning of graphene with low energy helium plasma implantation - Wei Luo, Key Laboratory of Microelectronics Devices & Integrated Technology, Institute of Microelectronics of Chinese Academy of Sciences |
|
| 14:15 - 16:30 |
› Bioactive layers grown by MAO on nitrogen plasma treated titanium with improved tribo-mechanical features - Gelson de Souza, Universidade Estadual de Ponta Grossa |
|
| 14:15 - 16:30 |
› Cellular reponses to titanium successively treated by magnesium and silver PIII&D - Huiliang Cao, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences |
|
| 14:15 - 16:30 |
› Characterization of Plasma Density and Ion Energy in Ribbon-like Cathodic Arc Plasma Magnetic Filter - Hongtao Liu, Beihang University |
|
| 14:15 - 16:30 |
› Characterization of the expanded austenite formed on a AISI 316 L stainless steel by plasma nitriding - MOURAD KEDDAM, Laboratoire de Technologie des Matériaux - Département Science des Matériaux |
|
| 14:15 - 16:30 |
› Drug release In Ti-15Mo alloy after plasma deposition associated biomimetic surface treatment - André Luiz Reis Rangel, Faculdade de Engenharia de Guaratinguetá - Universidade Estadual Paulista - Ana Paula Rosifini Alves Claro, Faculdade de Engenharia de Guaratinguetá - Universidade Estadual Paulista |
|
| 14:15 - 16:30 |
› Effect of argon ion implantation on the properties of plasma-polymerized acetylene films - Deborah Santos, CEETEPS - Faculty of Technology |
|
| 14:15 - 16:30 |
› Effect of Plasma Immersion Ion Implantation (PIII) with Different Gases on the Surface Properties of Carbon Fibers - Leide da Silva, Technological Faculty in Pindamonhangaba, Universidade Estadual Paulista |
|
| 14:15 - 16:30 |
› Effect of residual stress on the ionic conductivity of yttria stabilized zirconia nano-films - J.S. CHERNG, Department of Materials Engineering, Ming Chi University of Technology |
|
| 14:15 - 16:30 |
› Estimation of the effective boron diffusion coefficient in Fe2B and modeling of the growth kinetics of boride layers by the artificial neural network approach and the regression model - MOURAD KEDDAM, Laboratoire de Technologie des Matériaux - Département de Sciences des Matériaux |
|
| 14:15 - 16:30 |
› Films Deposited from Red Mud by PIIID - Maria Lúcia Antunes, Universidade Estadual Paulista Julio de Mesquita Filho - Elidiane Rangel, Universidade Estadual Paulista Julio de Mesquita Filho - Nilson Cruz, Univ Est Paulista |
|
| 14:15 - 16:30 |
› Graphite-like carbon films by high power impulse and direct-current magnetron sputtering - Meidong Huang, College of Physics and Electronic Information Science, Tianjin Normal University, Tianjin 300387, China |
|
| 14:15 - 16:30 |
› Improved adhesion of DLC films on copper substrates by preimplantation - Stefan Flege, Technische Universitaet Darmstadt |
|
| 14:15 - 16:30 |
› Influence of Ar/C2H2 ratio on structure and properties of Cr-DLC films deposited on stainless steels by high power pulsed magnetron sputtering - Chunzhi Gong, State Key Lab. of Advanced Welding & Joining, Harbin Institute of Technology |
|
| 14:15 - 16:30 |
› INFLUENCE OF GRAIN ORIENTATION ON RADIATION INDUCED STRAINS IN UO2 POLYCRYSTALS - Philippe Goudeau, Institut Pprime |
|
| 14:15 - 16:30 |
› Influence of ion-implantation on thermoluminescence of synthetic quartz - Nsengiyumva Schadrack, Rhodes University |
|
| 14:15 - 16:30 |
› Influence of the Concentration of OH Radicals on the Growth of Hydroxyapatite on Titanium Samples Treated by PBII&D - Rita de Cássia Rangel, Paulista State University |
|
| 14:15 - 16:30 |
› Influence of the magnetic field on DLC coatings grown by plasma immersion ion implantation and deposition - Mario Ueda, Associated Laboratory of Plasma, National Institute for Space Research, S. J. Campos, S. Paulo, Brazil |
|
| 14:15 - 16:30 |
› Ion implantation effect on Fe2O3 by low energy deuterium ion exposure - Yasuhiro Sakuma, Nagoya University |
|
| 14:15 - 16:30 |
› Low energy plasma immersion ion implantation for controlling the wettability of propylene - Elidiane Rangel, Universidade Estadual Paulista |
|
| 14:15 - 16:30 |
› Low temperature ultra-thin silicon oxide fabricated by plasma immersion ion implantation - Shay Reboh, Laboratoire d'Electronique et des Technologies de l'Information |
|
| 14:15 - 16:30 |
› Microstructures and Mechanical properties of Ti/TiC/Ti-DLC films deposited by hybrid High-power Magnetron sputtering (HPPMS) - W. W. Sun, State Key Lab. of Advanced Welding & Joining - Xiubo Tian, State Key Lab. of Advanced Welding & Joining |
|
| 14:15 - 16:30 |
› Modeling plasma sprayed nanostructured Al2O3–13wt%TiO2 coatings - KRIBAA Rafika Ilhem, Kribaa |
|
| 14:15 - 16:30 |
› Nanostructure formation and improved surface hardness of hypereutectic Al-17.5Si alloy induced by high current pulsed electron beam treatment - Bo Gao, Northeastern University |
|
| 14:15 - 16:30 |
› Preparation of diamond-like carbon films by double cathodes pulse glow discharge plasma vapor deposition - Fazhan Yang, The Engineering & technical College of Chengdu University of Technology, Southwestern Institute of Physics |
|
| 14:15 - 16:30 |
› Stress influence on the orientation of planar defects in Silicon - Maxime Vallet, Institut Pprime |
|
| 14:15 - 16:30 |
› Structural and tribo-mechanical characterization of nitrogen plasma treated titanium for bone implants - Gelson de Souza, Universidade Estadual de Ponta Grossa - Carlos Foerster, Universidade Estadual de Ponta Grossa |
|
| 14:15 - 16:30 |
› Structural Modification of Carbon Fibers by Plasma Immersion Ion Implantation (PIII) and Atmospheric Dielectric Barrier Discharge (DBD) – a Comparison - Konstantin Kostov, Universidade Estadual Paulista, São Paulo State University |
|
| 14:15 - 16:30 |
› STUDY OF FILMS PRODUCED BY PIIID OF HEXAMETHYLDISILAZANE-ARGON MIXTURE. - Rogério Mota, São Paulo State University - Konstantin Kostov, São Paulo State University - Felipe Kodayra, São Paulo State University |
|
| 14:15 - 16:30 |
› Study of morphology and stability of Al2O3 washcoat prepared by plasma spraying technique - Samson H. S. Cheng, Department of Physics and Materials Science, City University of Hong Kong |
|
| 14:15 - 16:30 |
› The Behavior of ion current in the high-power pulsed sputtering Penning discharge plasma device. - Azuma Kingo, University of Hyogo |
|
| 14:15 - 16:30 |
› The characteristics of hundred-mm cylindrical anode layer Hall plasma accelerator by experiments and three-dimensional particle in cell numerical investigation - Rick K. Y. Fu, Plasma Technology Limited |
|
| 14:15 - 16:30 |
› Thin and Thick Films of TiO2 by RF Inductive Plasmas Sputtering - RAUL VALENCIA-ALVARADO, Instituto Nacional de Investigaciones Nucleares |
|
| 14:15 - 16:30 |
› Tribological properties of diamond-like carbon coatings deposited using unbalanced magnetron sputtered with various tungsten filament currents - W. H. Kao, Institute of Mechatronoptic Systems, Chienkuo Technology University, Changhua, Taiwan. |
|
| 14:15 - 16:30 |
› ZnO Gas Sensor Prepared by Plasma Based Ion Implantation - Mário Ueda, National Institute for Space Research |
|
|
17:00 - 17:30
|
Coach transportation to Poitiers Downtown - A coach will be available at 17:00 to transport participants from the workshop/hotels area to the downtown of Poitiers. |
|
|
17:30 - 20:00
|
Poitiers city visit - Historical touristic tour of Poitiers medevial downtown, commented by English speaking guid is proposed to participants.
Free tour in the downtown (shopping, bar, ...) is also possible. |
|
|
20:00 - 20:30
|
Coach transportation - Coach transportation from Poitiers downtown to the banquet place: Le Clos de la Ribeaudière |
|
|
20:30 - 23:00
|
Banquet (Restaurant Le Clos De La Ribaudière) |
|
|
23:00 - 23:30
|
Coach transportation - Coach transportation from the banquet place to the hotels Plazza and Altéora |
|
| Time |
Event |
|
|
08:40 - 10:15
|
Plasma-Based Ion Assisted Deposition and Pulsed Power Deposition (IFMI Amphitheatre) - R. Wei, X.Y. Liu |
|
| 08:40 - 09:15 |
› Amorphous hydrogenated carbon thin films deposited by segmented hollow cathode (Invited talk) - Carlos Figueroa, Plasmar Tecnologia, Universidade de Caxias do Sul |
|
| 09:15 - 09:35 |
› Strain-relaxed SiGe layer on Si formed by PIII&D technology - Seunghee Han, Photo-electronic Hybrids Research Center, Korea Institute of Science and Technology |
|
| 09:35 - 09:55 |
› Structure and tribological properties of magnetron sputtered quaternary (Ti,Zr)1-xAlxN and (Ti,Zr)1-xSixN films - Igor Saladukhin, Belarussian State University |
|
| 09:55 - 10:15 |
› The target sputtering mechanism in HIPIMS - Xinxin Ma, State Key Lab of Advanced Welding and Joining, Harbin Institute of Technology |
|
|
10:15 - 10:45
|
Coffee break (IFMI Hall) |
|
|
10:45 - 12:20
|
Plasma-Based Ion Assisted Deposition and Pulsed Power Deposition (IFMI Amphitheatre) - J. Pelletier, G. Abadias |
|
| 10:45 - 11:20 |
› Hybrid HIPIMS power supply and plasma ion implantation and deposition (Invited talk) - Xiubo Tian, State Key lab of advanced welding & Joining |
|
| 11:20 - 11:40 |
› CONTROL OF THE DUAL ION BEAM DEPOSITION PROCESS TO PERFORM LOW-LOSS MIRRORS. - Vincent DOLIQUE, Laboratoire des matériaux avancés |
|
| 11:40 - 12:00 |
› Alumina Precipitation in a-C:H Films by Plasma Immersion Ion Implantation and Deposition - Elidiane Rangel, Univ Est Paulista |
|
| 12:00 - 12:20 |
› Influence of nitrogen content on CrSiN thin film properties deposited by reactive HiPIMS - Axel FERREC, Institut des Matériaux Jean Rouxel - Frédéric SCHUSTER, Laboratoire Commun MATPERF CEA-Mécachrome |
|
|
12:20 - 12:40
|
Closing session (IFMI Amphitheatre) - L. Pichon, J. Pelletier |
|
|
12:40 - 14:15
|
Lunch |
|
|
