Accepted abstracts by author > Saoula Nadia

Tuesday 2
Posters session A

› 17:00 - 19:00 (2h)
› IFMI - Rooms A & B
Comparison of electrochemical behaviour of TiN and TiCN deposited on XC48 steel substrates by magnetron sputtering.
Madaoui Noureddine  1, 2@  , Nadia Saoula  3@  , Bachir Zaid  4@  , Djaffer Saidi  4@  
1 : Division Milieux Ionisés, centre de développement des technologies avancées
Cité du 20 août 1956, Baba Hassen, BP n°17, Alger, Algérie -  Algeria
2 : Laboratoire d'Electrochimie-Corrosion, Métallurgie et Chimie Minérale. Faculté de chimie, Université Des Sciences et de la Technologie Houari Boumediene.
B.P 32, El Alia, Bab Ezzouar, Alger 16111, Algérie -  Algeria
3 : Division Milieux Ionisés, Centre de Développement des Technologies Avancées CDTA
Cité du 20 août 1956, Baba Hassen, BP n°17, Alger, Algérie -  Algeria
4 : Division Technologie du Combustible, Centre de Recherche Nucléaire Draria
BP 43, Draria, 16000 Alger, Algérie -  Algeria

Many transition metal nitride and carbide coatings, especially TiN, TiCN, have achieved wide application in surface engineering. This is because these coatings exhibit many extraordinary properties, such as high hardness, good wear and high corrosion resistance, low friction and good electrical and thermal conductivity.

A range of different chemical compositions of TiCXNY and TiNZ coatings were deposited by a magnetron sputter ion plating technique onto XC48 steel substrates. Scanning electron microscope (SEM) and optical spectroscopy (OS) techniques were used to analyze and characterize chemically the TiCN and TiN layers.

The corrosion protection of the coatings were established by the electrochemical measurements in the Nacl at 3.5%, solution. The highest corrosion resistance of coated was found for the TiCN and the lowest one for TiN. Potentiodynamic tests performed in 3.5% NaCl showed that an increasing carbon content in the coating decreased the corrosion resistance. The influence of structure and microporosity of coatings, obtained by PVD method, on corrosion resistance was discussed.

Finally, it was found that TiCN and TiN coatings increased the corrosion potential of the XC48 steel in 3.5% NaCl solution at room temperature.


Online user: 1 RSS Feed