Scheduled programme

Week Mon. 01 Tue. 02 Wed. 03 Thu. 04 Fri. 05 List

	Mon. 01	Tue. 02	Wed. 03	Thu. 04	Fri. 05
08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00	Registration in Plaza Hotel 17:00 - 19:00 (2h) Registration in Plaza Hotel Registration board will be opened in the Plaza Hotel from 5:00 PM Welcome reception 19:00 - 21:00 (2h) Welcome reception Welcome reception will take place at the Plazza Hotel Téléport 1 – Avenue du Futuroscope - 86960 FUTUROSCOPE CHASSENEUIL at 200 m of the Workshop place (IFMI building) Registration board will be opened from 5:00 PM in the Plaza Hotel	Opening 8:15 - 8:40 (25min) Opening IFMI Amphitheatre L. Pichon, P.K. Chu Plenary Talk 8:40 - 9:25 (45min) Plenary Talk IFMI Amphitheatre P.K. Chu, J.-P. Rivière › Convergence of Plasma-Based Ion Implantation and Deposition Techniques (Plenary talk) - Andre Anders, Lawrence Berkeley National Laboratory, USA 08:40-09:25 (45min) Plasma and Ion Sources, Pulsed Power and PBII Systems 9:25 - 10:40 (1h15) Plasma and Ion Sources, Pulsed Power and PBII Systems IFMI Amphitheatre P.K. Chu, J.-P. Rivière › Solid-State modulators for Plasma Based Ion Implantation (Invited talk) - Luis Redondo, Lisbon Engineering Superior Institute, Nuclear Physics Center from Lisbon University 09:25-10:00 (35min) › Modulation Effects of Controllable Waveform configuration of Pulsed Bias on Microstructure and Properties of CrN Films by Magnetron Sputtering - Chunzhi Gong, State Key Lab. of Advanced Welding & Joining, Harbin Institute of Technology 10:00-10:20 (20min) › Plasma immersion ion implantation inside a conducting tube using an ExB fields configuration - Mario Ueda, Associated Laboratory of Plasma, National Institute for Space Research, S. J. Campos, S. Paulo, Brazil 10:20-10:40 (20min) Coffee break 10:40 - 11:00 (20min) Coffee break IFMI Hall Biomedical applications 11:00 - 12:40 (1h40) Biomedical applications IFMI Amphitheatre S. Mandl, C. Dublanche-Tixier › Surface modification of biomedical titanium using silver plasma immersion ion implantation (Invited talk) - Xuanyong Liu, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences 11:00-11:35 (35min) › Bioactivity of titanium surfaces after oxygen and water plasma treatments - Gelson de Souza, Universidade Estadual de Ponta Grossa - Carlos Foerster, Universidade Estadual de Ponta Grossa 11:35-11:55 (20min) › On Antimicrobial Surface Modifications of Titanium Substrates by Metal Plasma Immersion Ion Implantation and Deposition for Medical Applications - Frank Hempel, Leibniz-Institute for Plasma Science and Technology e.V. (INP) 11:55-12:15 (20min) › The mechanical compatibility and corrosion resistance of the titanium oxide film for vascular stent modification - Yongxiang Leng, Southwest Jiaotong University - Nan Huang, Southwest Jiaotong University 12:15-12:35 (20min) Lunch 12:40 - 14:15 (1h35) Lunch Plasma-Based Ion Implantation, Ion Beam Implantation and Plasma Surface Processing 14:15 - 16:30 (2h15) Plasma-Based Ion Implantation, Ion Beam Implantation and Plasma Surface Processing IFMI Amphitheatre S. Mukherjee, P.-Y. Tessier › New Developments of Active-Screen Plasma Surface Engineering (Invited talk) - Hanshan Dong, The University of Birmingham 14:15-14:50 (35min) › Electrical property modification of graphene by low energy ion implantation - Noriaki Matsunami, Nagoya University 14:50-15:10 (20min) › Influence of Reduced Current Density on PIII Nitriding of Austenitic Stainless Steel and CoCr Alloys - Stephan Mändl, Leibniz-Institut für Oberflächenmodifizierung 15:10-15:30 (20min) › Plasma immersion ion implantation against corrosion of PbSn organ pipes - Bernadeta Pelic, Helmholtz Zentrum Dresden-Rossendorf 15:30-15:50 (20min) › Plasma Immersion Ion Implantation tecnique in NiTi SMA produced by powder metallurgy - Eliene Camargo, Divisão de Materiais, Instituto Tecnológico de Aeronáutica 15:50-16:10 (20min) Coffee break 16:30 - 17:00 (30min) Coffee break IFMI Hall Posters session A 17:00 - 19:00 (2h) Posters session A IFMI - Rooms A & B › 3D Numerical simulation of ceramic droplet impact on different roughness surfaces in plasma spray process - Abdelbaki DJEBAILI, Djebaili 17:00-19:00 (2h) › Comparison of electrochemical behaviour of TiN and TiCN deposited on XC48 steel substrates by magnetron sputtering. - madaoui noureddine, Division Milieux Ionisés, centre de développement des technologies avancées, Laboratoire d'Electrochimie-Corrosion, Métallurgie et Chimie Minérale. Faculté de chimie, Université Des Sciences et de la Technologie Houari Boumediene. 17:00-19:00 (2h) › Comparison of surface patterning realized with and without ion bombardment on steels - Thierry Czerwiec, Institut Jean Lamour 17:00-19:00 (2h) › COMPARISON OF THREE DIFFERENT NITRIDING METHODS ON AISI 316L STAINLESS STEEL REGARDING WEAR AND CORROSION PERFORMANCE - Sonia Brühl, Universidad Tecnológica Nacional - Laura Vaca, Universidad Tecnológica Nacional 17:00-19:00 (2h) › Corrosion behavior of inconel 718 superalloy treated by plasma based ion implantation - Ana Claudia Hirschmann, Instituto tecnologico da aeronatica - H Reuther, eResearch Center Dresden-Rossendorf, Institute of Íon Beam Physics and Materials Research, Dreseden, Germany 17:00-19:00 (2h) › Effect of glow discharge low temperature nitriding and cathodic hydrogenation on hardness and surface morphology depending on crystallographic orientation in SAF 2101 duplex steel - Carlos Foerster, Universidade Estadual de Ponta Grossa 17:00-19:00 (2h) › EFFECT OF LOW RF BIAS POTENTIAL ON AlN FILMS OBTAINED BY PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION - Christelle DUBLANCHE-TIXIER, SPCTS CNRS UMR 7315 University of Limoges 17:00-19:00 (2h) › Effect of substrate bias on microstructure evolution and infrared reflectivity of TiAl alloy thin films - Zhang Min, School of Physics & Electronic Technology, Liaoning Normal University, Lab of Fuel Cell System & Engineering, Dalian Institute of Chemical Physics, Chinese Academy of Science 17:00-19:00 (2h) › Effects of pulsed bias on TiCN coatings by hybrid deposition of arc ion plating and magnetron sputtering - Meidong Huang, College of Physics and Electronic Information Science, Tianjin Normal University, Tianjin 300387, China 17:00-19:00 (2h) › Elaboration and characterization of Gum metal thin films obtained by dc magnetron sputtering. - Sofiane ACHACHE, LASMIS - Salim Lamri, LASMIS - Alain Billard, LERMPS - Manuel FRANCOIS, LASMIS - fréderic SANCHETTE, LASMIS 17:00-19:00 (2h) › Electrochemical and nanomechanical characterization of ZrN coated NiTi after plasma nitriding - Rodrigo Basso, Universidade Federal da Integração Latino-Americana 17:00-19:00 (2h) › Growth-induced defect generation and intrinsic stress in Ta sputtered films : a comparison between alpha-Ta and beta-Ta phases - Jonathan Colin, Institut Pprime 17:00-19:00 (2h) › Improvement of Oxidation-resistance of CrN films by Plasma Ion Implantation Based on High-power Pulsed Magnetron Sputtering - Yinghe Ma, State Key Lab. of Advanced Welding & Joining 17:00-19:00 (2h) › Influence of Plasma Based Ion Implantation on the martensitic transformations temperatures of NiTi SMA - Maria Silva, Insituto Tecnológico de Aeronáutica 17:00-19:00 (2h) › Ion nitriding of supermartensitic stainless steel HP13Cr by the glow discharge and cathodic cage techniques - Gelson de Souza, Universidade Estadual de Ponta Grossa - Carlos Foerster, Universidade Estadual de Ponta Grossa 17:00-19:00 (2h) › Mechanical study of nano-structured thin films under controlled biaxial deformation - Raphaëlle GUILLOU, Institut Pprime 17:00-19:00 (2h) › MFM imaging of expanded austenite formed in stainless steel and CoCr alloys - Mehmet Fidan, Iztech 17:00-19:00 (2h) › MICROSTRUCTURE AND CORROSION BEHAVIOUR OF ION NITRIDED AISI 316L COATED WITH TITANIUM NITRIDE - Laura Vaca, Universidad Tecnológica Nacional - Sonia Brühl, Universidad Tecnológica Nacional 17:00-19:00 (2h) › Modification of surface morphology of austenitic-like FCC alloys induced by plasma assisted nitriding - Sébastien CHOLLET, Institut Pprime 17:00-19:00 (2h) › Nanoindentation measurements in plan view and cross section in a nitrided maraging steel: relation between hardness and nitrogen concentration - Christophe TROMAS, Institut Pprime 17:00-19:00 (2h) › Nitriding of maraging steel grade 300 by plasma immersion ion implantation - Jose García, Asociación de la Industria Navarra 17:00-19:00 (2h) › Nitrogen plasma immersion ion implantation in round wire NiTi SMA - Eliene Camargo, Divisão de Materiais 17:00-19:00 (2h) › Plasma immersion ion implantation of oxygen and nitrogen as a tool for studying the environmental embrittlement in TiAl alloys at elevated temperatures - Rossen Yankov, Helmholtz-Zentrum Dresden-Rossendorf 17:00-19:00 (2h) › Plasma-based nitriding and oxidizing of CoCrMo: investigation of structural and corrosion characteristics for biomedical applications - Fotini Noli, Aristotle University 17:00-19:00 (2h) › Roughness and creep studies of Ti-6Al-4V alloy treated by Nitrogen Plasma Based Ion Implantation - Susana Zepka, Instituto Tecnológico de Aeronáutica - Maria Silva, Instituto Tecnológico de Aeronáutica - Danieli Reis, Universidade Federal de São Paulo - Mário Ueda, National Institute for Space Research - Carlos Moura Neto, Instituto Tecnológico de Aeronáutica - Luc PICHON, Institut Pprime 17:00-19:00 (2h) › Stabilization of α-Ta by WTi ultra-thin underlayer - Arnaud Le Priol, Institut Pprime, Sofradir - Argenteuil 17:00-19:00 (2h) › Structural and mechanical properties of TiON nanocomposite films deposited on silicon by pulsed bias arc ion plating - Zhang Min, Lab of Fuel Cell System & Engineering, Dalian Institute of Chemical Physics, Chinese Academy of Science, School of Physics & Electronic Technology, Liaoning Normal University 17:00-19:00 (2h) › Surface modification and corrosion properties of implanted and DLC coated stainless steel by plasma based ion implantation - Ruriko Hatada, Technische Universitaet Darmstadt 17:00-19:00 (2h) › Synthesis of carbon/metal nanocomposites by PVD/PECVD - Pierre-Yves Tessier, Institut des Matériaux Jean Rouxel 17:00-19:00 (2h) › The effect of element content on structure and mechanical properties - Xinxin Ma, State Key Lab of Advanced Welding and Joining, Harbin Institute of Technology 17:00-19:00 (2h) › THE PREDICTION OF COATING MICROSTRUCTURE IN PLASMA SPRAY PROCESS - Abdelbaki DJEBAILI, Djebaili - Benoumsaad Kamel, Kamel 17:00-19:00 (2h) › The Research of Cutting Tools Superhard Films having Strong Films and Substrate Binding Energy - pengzhi zhu, School of Mechanical Engineering and Automation - Beihang University 17:00-19:00 (2h) › TiN ions implantation on SS316L targets by a 4kJ plasma focus facility - Morteza Habibi, Amirkabir University of Technology 17:00-19:00 (2h) › Tungsten Coated on Copper Substrate Through the Double-Glow Discharge - Chen Qiang, Beijing Institute of Graphic Communication 17:00-19:00 (2h) › Wear and corrosion protective coatings produced by plasma electrolytic oxidation of aluminum alloys - Nilson Cruz, Univ Est Paulista 17:00-19:00 (2h) "Wines and Cheeses" Party 19:00 - 21:00 (2h) "Wines and Cheeses" Party IFMI Hall	Corrosion and Wear Treatments 8:40 - 10:15 (1h35) Corrosion and Wear Treatments IFMI Amphitheatre X.B. Tian, T. Czerwiec › Depth dependent phase transformation in steels treated with nitrogen plasma (Invited talk) - SUBROTO MUKHERJEE, Institute for Plasma Research, India 08:40-09:15 (35min) › Wear behaviors and corrosion resistance of aluminum alloys treated by nitrogen plasma immersion ion implantation process - Hongxi Liu, Kunming University of Science and Technology 09:15-09:35 (20min) › Reduction of Corrosion Current of CoCr Alloys by Post-PIII Oxidation - Cristina Díaz, Asociacion de la Industria Navarra 09:35-09:55 (20min) › Cavitation erosion resistance of Carbon Steels Implanted with Nitrogen and Chromium ions - Fengbin Liu, North China University of Technology 09:55-10:15 (20min) Coffee break 10:15 - 10:45 (30min) Coffee break IFMI Hall Plasma-Based Ion Implantation, Ion Beam Implantation and Plasma Surface Processing 10:45 - 12:40 (1h55) Plasma-Based Ion Implantation, Ion Beam Implantation and Plasma Surface Processing IFMI Amphitheatre H. Dong, C. Templier › Analysis of In Situ XRD Measurements for Nitriding of fcc Metals (Invited talk) - Darina Manova, Leibniz-Institut für Oberflächenmodifizierung 10:45-11:20 (35min) › Hardness and elastic modulus gradients in plasma nitrided 316l polycrystalline stainless steel investigated by nanoindentation tomography - Christophe TROMAS, Institut Pprime 11:20-11:40 (20min) › Improved Hardness and Tribological Properties and Detailed Surface Analyses of Niobium Treated by High Temperature Plasma Based Ion Implantation - Mario Ueda, Associated Laboratory of Plasma, National Institute for Space Research, S. J. Campos, S. Paulo, Brazil 11:40-12:00 (20min) › Characteristic features of expanded austenite layers formed on CoCrMo implant alloy by floating potential plasma nitriding - Orhan Öztürk, Izmir University 12:00-12:20 (20min) › Surface modification of protective coatings on titanium aluminides by plasma immersion ion implantation of fluorine to suppress environmental embrittlement at high temperatures - Rossen Yankov, Helmholtz-Zentrum Dresden-Rossendorf 12:20-12:40 (20min) Lunch 12:40 - 14:15 (1h35) Lunch Plasma-Based Ion Assisted Deposition and Pulsed Power Deposition 14:15 - 16:30 (2h15) Plasma-Based Ion Assisted Deposition and Pulsed Power Deposition IFMI Amphitheatre C.A. Figueroa, L. Redondo › Reactive High-Power Impulse Magnetron Sputtering: plasma diagnostics and thin film synthesis (Invited talk) - Stephanos Konstantinidis, University of Mons 14:15-14:50 (35min) › Hydrogen Induced Buckling of Gold Films - Marot Laurent, Department of Physics University of Basel 14:50-15:10 (20min) › Calculation of film thickness distribution onto disk substrates in multi-cathode magnetron sputtering system with plate targets - Anatoly Kuzmichev, National Technical University of Ukraine "Kiev Politechnical Institute" 15:10-15:30 (20min) › Nanorippled dielectric thin films as templates for self-organized silver nanoparticles using a dual ion-beam sputtering system - Elliot Vandenhecke, Institut Pprime - Poitiers 15:30-15:50 (20min) › IN SITU XRD STUDIES, USING SYNCHROTRON RADIATION, OF THIN FILM GROWING BY REACTIVE SPUTTER MAGNETRON TECHNIQUE. - Jorge Feugeas, Instituto de Fisica Rosario, CONICET-UNR - Aldo Craievich, Universidad de São Paulo, São Paulo, Brasil 15:50-16:10 (20min) › Development of in-plane texture in Cu thin films by post deposition ion beam treatment - Huan Ma, Department of Materials, ETH Zurich 16:10-16:30 (20min) Futuroscope Park discovery 17:00 - 23:00 (6h) Futuroscope Park discovery	Alternative & Hybrid Processes 8:40 - 10:15 (1h35) Alternative & Hybrid Processes IFMI Amphitheatre M. Ueda, M.-L. David › Surface modification of materials by cold atmospheric plasma (Invited talk) - Konstantin G. Kostov, Universidade Estadual Paulista 08:40-09:15 (35min) › Numerous impacts of energetic fullerene clusters on silicon crystal surface: modification features - Vasily Lavrentiev, Nuclear Physics Institute AS CR 09:15-09:35 (20min) › Duplex surface treatments combining surface mechanical attrition treatment (SMAT) and low temperature plasma nitriding - Mahdi CHEMKHI, University of Technology of Troyes 09:35-09:55 (20min) › Kinetics of hydrogen interaction with a-Si:H based thin films and structures : In situ ellipsometry investigation - Aomar HADJADJ, Laboratoire d'Ingénierie et Sciences des Matériaux 09:55-10:15 (20min) Coffee break 10:15 - 10:45 (30min) Coffee break IFMI Hall Industrial Applications, Scaling Issues 10:45 - 12:40 (1h55) Industrial Applications, Scaling Issues IFMI Amphitheatre A. Anders, M. Drouet › Plasma Immersion Ion Implantation for Semiconductor Industries: Specific Challenges and Example of Applications for Advanced Devices (Invited talk) - Yohann Spiegel, Ion Beam Services 10:45-11:20 (35min) › HiPIMS deposition of oxide thin films for solid oxide fuel cells - Steffen Sønderby, Tribology Centre, Danish Technological Institute, Thin Film Division, Department of Physics, Chemistry, and Biology, Linköping University 11:20-11:40 (20min) › Multidimensional depth profile analysis of Plasma Coatings by Plasma Profiling Techniques, GD OES and PP TOFMS - Patrick Chapon, Horiba Jobin Yvon 11:40-12:00 (20min) Lunch 12:40 - 14:15 (1h35) Lunch Posters session B 14:15 - 16:30 (2h15) Posters session B IFMI - Rooms A & B › Atomic-layer thinning of graphene with low energy helium plasma implantation - Wei Luo, Key Laboratory of Microelectronics Devices & Integrated Technology, Institute of Microelectronics of Chinese Academy of Sciences 14:15-16:30 (2h15) › Bioactive layers grown by MAO on nitrogen plasma treated titanium with improved tribo-mechanical features - Gelson de Souza, Universidade Estadual de Ponta Grossa 14:15-16:30 (2h15) › Cellular reponses to titanium successively treated by magnesium and silver PIII&D - Huiliang Cao, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences 14:15-16:30 (2h15) › Characterization of Plasma Density and Ion Energy in Ribbon-like Cathodic Arc Plasma Magnetic Filter - Hongtao Liu, Beihang University 14:15-16:30 (2h15) › Characterization of the expanded austenite formed on a AISI 316 L stainless steel by plasma nitriding - MOURAD KEDDAM, Laboratoire de Technologie des Matériaux - Département Science des Matériaux 14:15-16:30 (2h15) › Drug release In Ti-15Mo alloy after plasma deposition associated biomimetic surface treatment - André Luiz Reis Rangel, Faculdade de Engenharia de Guaratinguetá - Universidade Estadual Paulista - Ana Paula Rosifini Alves Claro, Faculdade de Engenharia de Guaratinguetá - Universidade Estadual Paulista 14:15-16:30 (2h15) › Effect of argon ion implantation on the properties of plasma-polymerized acetylene films - Deborah Santos, CEETEPS - Faculty of Technology 14:15-16:30 (2h15) › Effect of Plasma Immersion Ion Implantation (PIII) with Different Gases on the Surface Properties of Carbon Fibers - Leide da Silva, Technological Faculty in Pindamonhangaba, Universidade Estadual Paulista 14:15-16:30 (2h15) › Effect of residual stress on the ionic conductivity of yttria stabilized zirconia nano-films - J.S. CHERNG, Department of Materials Engineering, Ming Chi University of Technology 14:15-16:30 (2h15) › Estimation of the effective boron diffusion coefficient in Fe2B and modeling of the growth kinetics of boride layers by the artificial neural network approach and the regression model - MOURAD KEDDAM, Laboratoire de Technologie des Matériaux - Département de Sciences des Matériaux 14:15-16:30 (2h15) › Films Deposited from Red Mud by PIIID - Maria Lúcia Antunes, Universidade Estadual Paulista Julio de Mesquita Filho - Elidiane Rangel, Universidade Estadual Paulista Julio de Mesquita Filho - Nilson Cruz, Univ Est Paulista 14:15-16:30 (2h15) › Graphite-like carbon films by high power impulse and direct-current magnetron sputtering - Meidong Huang, College of Physics and Electronic Information Science, Tianjin Normal University, Tianjin 300387, China 14:15-16:30 (2h15) › Improved adhesion of DLC films on copper substrates by preimplantation - Stefan Flege, Technische Universitaet Darmstadt 14:15-16:30 (2h15) › Influence of Ar/C2H2 ratio on structure and properties of Cr-DLC films deposited on stainless steels by high power pulsed magnetron sputtering - Chunzhi Gong, State Key Lab. of Advanced Welding & Joining, Harbin Institute of Technology 14:15-16:30 (2h15) › INFLUENCE OF GRAIN ORIENTATION ON RADIATION INDUCED STRAINS IN UO2 POLYCRYSTALS - Philippe Goudeau, Institut Pprime 14:15-16:30 (2h15) › Influence of ion-implantation on thermoluminescence of synthetic quartz - Nsengiyumva Schadrack, Rhodes University 14:15-16:30 (2h15) › Influence of the Concentration of OH Radicals on the Growth of Hydroxyapatite on Titanium Samples Treated by PBII&D - Rita de Cássia Rangel, Paulista State University 14:15-16:30 (2h15) › Influence of the magnetic field on DLC coatings grown by plasma immersion ion implantation and deposition - Mario Ueda, Associated Laboratory of Plasma, National Institute for Space Research, S. J. Campos, S. Paulo, Brazil 14:15-16:30 (2h15) › Ion implantation effect on Fe2O3 by low energy deuterium ion exposure - Yasuhiro Sakuma, Nagoya University 14:15-16:30 (2h15) › Low energy plasma immersion ion implantation for controlling the wettability of propylene - Elidiane Rangel, Universidade Estadual Paulista 14:15-16:30 (2h15) › Low temperature ultra-thin silicon oxide fabricated by plasma immersion ion implantation - Shay Reboh, Laboratoire d'Electronique et des Technologies de l'Information 14:15-16:30 (2h15) › Microstructures and Mechanical properties of Ti/TiC/Ti-DLC films deposited by hybrid High-power Magnetron sputtering (HPPMS) - W. W. Sun, State Key Lab. of Advanced Welding & Joining - Xiubo Tian, State Key Lab. of Advanced Welding & Joining 14:15-16:30 (2h15) › Modeling plasma sprayed nanostructured Al2O3–13wt%TiO2 coatings - KRIBAA Rafika Ilhem, Kribaa 14:15-16:30 (2h15) › Nanostructure formation and improved surface hardness of hypereutectic Al-17.5Si alloy induced by high current pulsed electron beam treatment - Bo Gao, Northeastern University 14:15-16:30 (2h15) › Preparation of diamond-like carbon films by double cathodes pulse glow discharge plasma vapor deposition - Fazhan Yang, The Engineering & technical College of Chengdu University of Technology, Southwestern Institute of Physics 14:15-16:30 (2h15) › Stress influence on the orientation of planar defects in Silicon - Maxime Vallet, Institut Pprime 14:15-16:30 (2h15) › Structural and tribo-mechanical characterization of nitrogen plasma treated titanium for bone implants - Gelson de Souza, Universidade Estadual de Ponta Grossa - Carlos Foerster, Universidade Estadual de Ponta Grossa 14:15-16:30 (2h15) › Structural Modification of Carbon Fibers by Plasma Immersion Ion Implantation (PIII) and Atmospheric Dielectric Barrier Discharge (DBD) – a Comparison - Konstantin Kostov, Universidade Estadual Paulista, São Paulo State University 14:15-16:30 (2h15) › STUDY OF FILMS PRODUCED BY PIIID OF HEXAMETHYLDISILAZANE-ARGON MIXTURE. - Rogério Mota, São Paulo State University - Konstantin Kostov, São Paulo State University - Felipe Kodayra, São Paulo State University 14:15-16:30 (2h15) › Study of morphology and stability of Al2O3 washcoat prepared by plasma spraying technique - Samson H. S. Cheng, Department of Physics and Materials Science, City University of Hong Kong 14:15-16:30 (2h15) › The Behavior of ion current in the high-power pulsed sputtering Penning discharge plasma device. - Azuma Kingo, University of Hyogo 14:15-16:30 (2h15) › The characteristics of hundred-mm cylindrical anode layer Hall plasma accelerator by experiments and three-dimensional particle in cell numerical investigation - Rick K. Y. Fu, Plasma Technology Limited 14:15-16:30 (2h15) › Thin and Thick Films of TiO2 by RF Inductive Plasmas Sputtering - RAUL VALENCIA-ALVARADO, Instituto Nacional de Investigaciones Nucleares 14:15-16:30 (2h15) › Tribological properties of diamond-like carbon coatings deposited using unbalanced magnetron sputtered with various tungsten filament currents - W. H. Kao, Institute of Mechatronoptic Systems, Chienkuo Technology University, Changhua, Taiwan. 14:15-16:30 (2h15) › ZnO Gas Sensor Prepared by Plasma Based Ion Implantation - Mário Ueda, National Institute for Space Research 14:15-16:30 (2h15) Coach transportation to Poitiers Downtown 17:00 - 17:30 (30min) Coach transportation to Poitiers Downtown A coach will be available at 17:00 to transport participants from the workshop/hotels area to the downtown of Poitiers. Poitiers city visit 17:30 - 20:00 (2h30) Poitiers city visit Coach transportation 20:00 - 20:30 (30min) Coach transportation Coach transportation from Poitiers downtown to the banquet place: Le Clos de la Ribeaudière Banquet 20:30 - 23:00 (2h30) Banquet Restaurant Le Clos De La Ribaudière Coach transportation 23:00 - 23:30 (30min) Coach transportation Coach transportation from the banquet place to the hotels Plazza and Altéora	Plasma-Based Ion Assisted Deposition and Pulsed Power Deposition 8:40 - 10:15 (1h35) Plasma-Based Ion Assisted Deposition and Pulsed Power Deposition IFMI Amphitheatre R. Wei, X.Y. Liu › Amorphous hydrogenated carbon thin films deposited by segmented hollow cathode (Invited talk) - Carlos Figueroa, Plasmar Tecnologia, Universidade de Caxias do Sul 08:40-09:15 (35min) › Strain-relaxed SiGe layer on Si formed by PIII&D technology - Seunghee Han, Photo-electronic Hybrids Research Center, Korea Institute of Science and Technology 09:15-09:35 (20min) › Structure and tribological properties of magnetron sputtered quaternary (Ti,Zr)1-xAlxN and (Ti,Zr)1-xSixN films - Igor Saladukhin, Belarussian State University 09:35-09:55 (20min) › The target sputtering mechanism in HIPIMS - Xinxin Ma, State Key Lab of Advanced Welding and Joining, Harbin Institute of Technology 09:55-10:15 (20min) Coffee break 10:15 - 10:45 (30min) Coffee break IFMI Hall Plasma-Based Ion Assisted Deposition and Pulsed Power Deposition 10:45 - 12:20 (1h35) Plasma-Based Ion Assisted Deposition and Pulsed Power Deposition IFMI Amphitheatre J. Pelletier, G. Abadias › Hybrid HIPIMS power supply and plasma ion implantation and deposition (Invited talk) - Xiubo Tian, State Key lab of advanced welding & Joining 10:45-11:20 (35min) › CONTROL OF THE DUAL ION BEAM DEPOSITION PROCESS TO PERFORM LOW-LOSS MIRRORS. - Vincent DOLIQUE, Laboratoire des matériaux avancés 11:20-11:40 (20min) › Alumina Precipitation in a-C:H Films by Plasma Immersion Ion Implantation and Deposition - Elidiane Rangel, Univ Est Paulista 11:40-12:00 (20min) › Influence of nitrogen content on CrSiN thin film properties deposited by reactive HiPIMS - Axel FERREC, Institut des Matériaux Jean Rouxel - Frédéric SCHUSTER, Laboratoire Commun MATPERF CEA-Mécachrome 12:00-12:20 (20min) Closing session 12:20 - 12:40 (20min) Closing session IFMI Amphitheatre L. Pichon, J. Pelletier Lunch 12:40 - 14:15 (1h35) Lunch

Online user: 1

RSS Feed